I've enjoyed & benefited from builders documenting & posting pictures of their projects on this forum, so I've decided to try to stop being so lazy, & share a few pictures once in awhile. Esser's recent posts about the LLE & the wingtip mounting strips prompted me to start.
I didn't have a multi-tool to cut the fiberglass, but I found that a Dremel tool & a large sanding drum worked very fast & easy for me. I scalloped the trailing edge of the LLE, as done by Bill & Phil (Desert Fox 1).
IMG_1338.jpgIMG_1426.jpgIMG_1431.jpg
I didn't like the lack of edge hole clearance on the tip attach strips either. What I did was bend a little upturned lip on the edge on each one that allowed me to position them tightly against the rib, with the "lip" bending up/over the small bead or fillet of epoxy at the rib/cap-strip joint. This gave me adequate edge hole distance to suit my fussy nature.
IMG_1523.jpgIMG_1524.jpg