Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Horizontal stab - elevator misalignment

  1. #1

    Join Date
    Feb 2014
    Location
    Three Lakes, Wi
    Posts
    42

    Default Horizontal stab - elevator misalignment

    Hello all,

    I have been working on the horizontal tail on my 7SS kit. I have a slight mis-alignment between the elevator hinge tabs and the bushing weldments on the horizontal stab. It's not much, but is enough to make getting the bolts in extremely difficult. Wondering if anyone else has had this problem and if there are any suggestions on how to remedy the problem?

    Thanks in advance for any and all comments.

    Bob

  2. #2
    RJK_Omaha's Avatar
    Join Date
    May 2020
    Location
    Omaha, NE
    Posts
    11

    Default Re: Horizontal stab - elevator misalignment

    Bob...The thread 'Elevator Binding' was helpful to me in solving what seems to be a similar issue.
    Richard Kolkman
    S7SS, 912iS
    First Flight: 10/25/24


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •