I'm guessing that if using the Matcos with the big tires you may have to use double calipers like the Highlander guys are doing? My Highlander with Matco brakes will not hold on runup with just 850's and single calipers.
(Although recently I've learned that if I used smaller brake lines they will hold better?)
I ran Nancos for a couple of years until I found a deal on a set of 26" Airstreaks with double caliper Matco brakes and wheels. Never had a problem with the original calipers (I could lock my Nancos up), but I knew of a few who did. I have a friend who is running Nancos and looking for somthing more. Would it be possible to install two of the original matco calipers.
I'm curious as to how low a psi these can be run at. To me size is one thing but the performance of a bush tire is based on the cushioning effect. I used to run my nancos at 4-5 psi. I run my Airstreaks at 2.5 to 3 psi.
Nick W
IV 1200
912Ul
Warp Taper Tip
Nick,
Funny you mention using double calipers as I have a spare set I took off my RANS S7 when I replaced the entire landing gear. I noticed they are identical to the older style calipers on this Kitfox I just purchased. I know they were barely adequate when on the RANS and it had 6-6.00 tires. I am going to try and make a dual caliper set-up with this 'take-off' set I have. It should be fairly straight forward, just have to get a different backing plate made.
Also, Matco sells an 'intensifier' that is a sleeve and new piston to go inside the stock sized master cylinder. I spoke indepth with Goerge of Matco this summer at Oshkosh and he recommended that I should try it before other options since it is the least expensive upgrade. I think the cost was $17.00.
Unfortunately I have Cleveland master cylinders and he was not sure at the time if the kit would fit since it is designed for the Matco cylinders.
What would be the best route if you have a grove setup of 6" wheels and matching brake rotors.
Could you keep the Grove brakes and rotors and switch to a different Matco rim and Desser 27" tire?
That would be awesome to be able to swap between them.
My KF4-1200 and many others run that setup. Grove brakes are nice and strong and can hold the Desser 22" smoothies no problem.
I'm very happy with them but I'd be very interested in a 27" for sure!
Kitfox IV - 1200 (1994) #1830
Rotax 912
Grove Gear, Wheels, Brakes
22" Desser Tundra Tires
Anyone try the 27" yet?
Nick W
IV 1200
912Ul
Warp Taper Tip
their not shipping till march 2015.im also anticipating
Oh, so I guess no ones tried them
Nick W
IV 1200
912Ul
Warp Taper Tip
desser shipped my 27" yesterday .looking forward to trying them.id like to hear others experience with them as well.