I need Help!!

[Russian]

I ask for help, friends! I live in Russia and at us isn't present KF4 only 2 KF2 and KF7, and it to Russia to deliver very expensive, but I was lucky to buy a fuselage in Portugal, wings and a control system in America, but there was a problem - a fuselage probably from KF 3 or early KF4, and a control system from KF4. You couldn't prompt length of these pipes in the photo?
Forgive that I badly speak on English-I only started studying this language!

[Russian]

I need to know length of these three steel tube to install a control system. Prompt, please!

[Esser]

I don't have a model 4 or I would go out and measure but someone will have the answer here for you soon

[tomec]

I can not tell what you want

[Esser]

I think he wants someone with a KF4 fuselage to measure the three tubs that make up the triangle that he has circled

[avidflyer]

Please give some more information what you want. I would be glad to measure my Kitfox 4 project, but I don't know what you need. Thanks, Jim Chuk

[mr bill]

Previot Tovarisch: Bottom tube (longeron) length is 10.5 inches, left tube is 10.5 inches X 3/8 inch diameter, right tube is 5.75 inches long. All measurements are to centers of tube intersections.

[MotReklaw]

10.5 inches is 26.67 cm, which I would round off as 26.5 cm

5.5 inches is 13.97 cm, 14 cm

Europe/Asia is generations ahead of us using the metric system. I was a science teacher 40 years ago and tried to teach the metric system.... finally gave up 30 years ago. I have several meter sticks and 13 m tape measures. I really like working with metrics....

This is not meant as a criticism of anyone.

[Esser]

Believe it or not I was really disappointed when I found out the Kitfox wasn't Metric. Ah well. Growing up in Canada you get a really good handle on both.

But a 2X4 will always be a 2X4....even though dressed it's 1.5"X3.5"

[MotReklaw]

Growing up in the deep South, USA, I forget about our friendliest neighbor, Canada. Like the church of Galileo's day, I often think the sun revolves around us.

Sorry for the digression and promise not to do it again.
:-)
Or was that Copernicus? :-)

Believe it or not I was really disappointed when I found out the Kitfox wasn't Metric. Ah well. Growing up in Canada you get a really good handle on both.

But a 2X4 will always be a 2X4....even though dressed it's 1.5"X3.5"