Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Son of a........!!!!!!!

  1. #1

    Join Date
    Sep 2012
    Location
    Scandia, MN
    Posts
    52

    Default Son of a........!!!!!!!

    After about 40 hours on my newly re engined baby, was just about ready to put the floats on!!! The Chief Pilot who flew with me the first 10 for the insurance, asked to use it for some personal proficiency. "Carry your own insurance, fill the fuel, don't bend it". 1st landing attempt.

    He's fine. Pride wounded. As the chief of a 141 and 135 operation, it's a rough go. His pride is healing faster than the bird I fear. Trying to get a parts list together for the wing from lift tubes outboard. Build manual is pretty vague I fear. Obviously motor needs a tear down. And new IVO prop. But most concerned about the bent left fuse attach point for gear.

    Having trouble attaching more than one pic. Watch for subsequent posts for balance of the horror story.
    Attached Images Attached Images

  2. #2

    Join Date
    Sep 2012
    Location
    Scandia, MN
    Posts
    52

    Default Re: Son of a........!!!!!!!

    It didn't use to look this way
    Attached Images Attached Images

  3. #3

    Join Date
    Sep 2012
    Location
    Scandia, MN
    Posts
    52

    Default Re: Son of a........!!!!!!!

    Both brand new too.
    Attached Images Attached Images

  4. #4
    Senior Member chefwarthog's Avatar
    Join Date
    Dec 2010
    Location
    Nicolet, Quebec, Canada
    Posts
    269

    Default Re: Son of a........!!!!!!!

    Denny, it is heart braking to see your bird in this condition.... And the pilote it's still alive?£"X*?!!¬¤¢£ :-( ..... Borrow someone else plane and broken it like that.... he sure feel small in his shoes..... this it a bad situation.... Really heart braking!!!
    Eric Therrien
    Nicolet, Qc. Ca.
    In preparation.

  5. #5
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Son of a........!!!!!!!

    Oh man, that really sucks!
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  6. #6
    Senior Member Geowitz's Avatar
    Join Date
    Mar 2010
    Location
    Middle North Carolina
    Posts
    456

    Default Re: Son of a........!!!!!!!

    Please tell me he really did have insurance and didn't skimp on that.

  7. #7

    Join Date
    Sep 2012
    Location
    Scandia, MN
    Posts
    52

    Default Re: Son of a........!!!!!!!

    To answer several, yes it's heartbreaking. Yes he's still alive ( for now ). And his company just yesterday said that its not really their responsibility. Cause he was not giving instruction. He better have good insurance personally. P#sses a guy off. Thanks for the thoughts.

    Look at bright side. I'll have lots of things to post about now. Lol

    And one if those things is going to be the charter and flight schools name plus his name if this doesn't get moving soon.

  8. #8
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Son of a........!!!!!!!

    Man oh man what a bummer, so sorry to see this. Hope the repairs go well.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  9. #9
    tommg13780's Avatar
    Join Date
    Nov 2008
    Location
    Guilford, NY
    Posts
    156

    Default Re: Son of a........!!!!!!!

    Fitch up north,
    I have a right wing, model 2 if you may be interested. Unfortunately we are quite far apart. Let me know.

  10. #10
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Son of a........!!!!!!!

    Motor may not need a full tear down since the prop was composite. I would talk to an expert with your motor and find out. The gear box may be the problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •