-
Horizonal lift struts
OK. Here it is. I have a Model 4 Speedster and I have a pair of the streamlines lift struts for the horizontal. The front attachment is the ball type adjustable but the rear is flat with a 1/4" hole. The bolt is 3/16". Is this too much "slop" that might cause excessive wear? I appreciate all advise. James Thomas
-
Senior Member
Re: Horizonal lift struts
James,
The hole is supposed to be 3/16" as you know. I don't think I would be comfortable with the excess room. A couple of thoughts. I think the first thing I would try is to make a bushing that would reduce the hole diameter. An idea might be to get a couple of quarter inch steel pop rivets, remove the mandrel and drill to 3/16" ID and cut the free end slightly shorter than the tab thickness. If you weld or have a friend who does, you could weld the hole shut sand smooth and redrill.
Lowell
-
Senior Member
Re: Horizonal lift struts
Make bushings from a short piece of 1/4 inch O.D. steel brake line tubing available at auto parts or from salvage. The I.D. is 3/16
JP
-
Re: Horizonal lift struts
I modified mine with rod ends for easy adjustment.
-
Super Moderator
Re: Horizonal lift struts
I scrapped mine with the rod ends for a solid "V" shaped strut. I was not happy with the idea of that tiny threaded rod-end.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
-
Re: Horizonal lift struts
I may have solved my problem. I have some hard nylon tubing, the type you might run control cables through. It's 3/16" inside diameter and 1/4" outside. I cut a piece just wide enough for the thickness of the strut and slid it on the bolt then through the lift strut. It should prevent any movement that might wallow out the 1/4" hole and give some cushioning too. What do y'all think, good fix or not? James Thomas
-
Senior Member
Re: Horizonal lift struts
Good idea, that would work for me.
Lowell
-
Super Moderator
Re: Horizonal lift struts
I would add a washer on either side and call her fixed.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules