Does anyone know what the replacement part number from aircraft spruce for kf5 flaperon mass balance weight rivets? Kf is 3/32 x1/8 Monel p/n 90045-000. Do you use solid rivets on the rear rivets on balancer?
Does anyone know what the replacement part number from aircraft spruce for kf5 flaperon mass balance weight rivets? Kf is 3/32 x1/8 Monel p/n 90045-000. Do you use solid rivets on the rear rivets on balancer?
It would look nicer if they are solids.
Why not buy the rivets from Kitfox?
Jim
I need the rivet now, aircraft spruce is 30 minutes from me, does make good sense to order, all I ask for was a part number
I don't think ACS carries the 3/32 rivets. I can't find them in the catalogue.
Tom Jones
Classic 4 builder
Thanks, there is another supplier in sun valley ca that should have them. Just finishing the tips
http://www.aircraftspruce.com/catalo...alumrivets.php
AN426AD-3-2 = 3/32 x 1/8
Order by the pound.
Okay, I thought you were looking for the monel pull rivets.
Tom Jones
Classic 4 builder
Oh, sorry, I thought was looking for solid. Well, anyways doing just a few solids are easy enough and finish off better.
Here are some pull rivets...
http://www.aircraftspruce.com/catalo...errynrivet.php
MSP-32 MD319BS = 3/32 x 1/8
There's a flush head version farther down the chart as well, but it's stainless which is certainly usable too.
Last edited by Geowitz; 03-20-2013 at 02:34 PM.
Anyone in Burbank ca area that needs rivets, Hanson rivet 800-777-4838 is the place! Located 13241weidner street pacoima ca 91331