Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 3 of 10 FirstFirst 1234567 ... LastLast
Results 21 to 30 of 91

Thread: Kitfox Factory Fly-in 2013

  1. #21
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Re: Kitfox Factory Fly-in 2013

    Sounds great Steve, I'll have to come up and check it out.
    Dan B
    Mesa, AZ

  2. #22
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    Dan, yes by all means.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  3. #23
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    Just checked the bed situation in the 2 spare bedrooms. I had to physically look because that's not my deparent (if you know what I mean). There are 2 bedrooms. One has a full sized bed (for 2). The other bedroom has 2 single beds. They're all yours if you want them (I even checked and got the OK from the Spuosal Unit!
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  4. #24
    Senior Member
    Join Date
    Feb 2011
    Location
    wilmington nc
    Posts
    201

    Default Re: Kitfox Factory Fly-in 2013

    hi steve, thanks for the invite to overnight at your place. looks like we might be getting a convoy together for the trip, that would be great the more the merrier.

  5. #25
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    10-4. Bring it on "Rubber Ducky". We can make it work!
    I'll throw in with you from Ogden on ...
    Last edited by SkySteve; 07-20-2013 at 11:35 AM.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  6. #26
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    Guys, here is some local info that will help you from Evanston, WY (EVW) to Ogden, UT (KOGD):

    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  7. #27
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    671

    Default Re: Kitfox Factory Fly-in 2013

    Steve, Thanks, great info. I had gotten to the point of wondering if Weber Canyon was a wind machine, and how to get through the Hill AFB airspace but the light bulb hadn't gone off about simpler routing. Into Foreflight it goes.
    -- Paul S
    Model III SN910
    582 IVO Med

  8. #28
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Kitfox Factory Fly-in 2013

    Hi guys,

    Natalie and I are thinking of flying down in the Cherokee. It's about 550nm direct so I'm not sure how long it will be by the time we hit the passes coming in through from the north.

    Either way it all depends on Natalie getting time off work but if we do make it, will any body have an empty seat for the fly out? I doubt the Cherokee can go where they are planning on going with the Kitfoxes...just a guess.

    I think we will probably camp with the plane if the weather looks decent since we havent used the tent all year.

  9. #29
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    536

    Default Re: Kitfox Factory Fly-in 2013

    Factory fly-in is quickly approaching… Hope to see you there!

    Please RSVP and get your Dinner Tickets in advance. That allows us for better overall planning and the caterer requires us to pre-purchase the dinners by Aug 31st.

    Stick & Rudder Aviation is considering offering Flight Reviews (BFR’s) during the fly-in. As you may know, the Flight Review (FAR Part 61.56) now requires 1 hour ground and 1 hour flight… The ground portion may be offered free of charge as a group class and the flight portion would be scheduled with the instructors. This may be a good opportunity to couple a BFR with a little Mountain/Canyon Flying knowledge. More details will be offered soon.

    For more info you can get the flyer here http://www.kitfoxaircraft.com/images...aft%202013.pdf
    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"

  10. #30
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,563

    Default Re: Kitfox Factory Fly-in 2013

    Bump. Getting close now. Make your final arrangements for lodging and food now.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •