Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: oops! on the wing tip

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-18-2012, 11:25 AM #1
    phintz
    phintz is offline
    Join Date
    Nov 2012
    Location
    Battle Creek, Ne
    Posts
    165

    Default oops! on the wing tip

    I went and read the instructions like 3-4 times on this matter and seen were it says do not attach removable wing tip until fabric covering is complete. But overlooked the part about the 3/4 inch metal strip!! I riveted it on the end cap. I'm thinking that I will need to remove the metal strip to glue the fabric on the cap and over it. Am I thinking correctly on this? So i'm guessing the rivets will go through the fabric on top of the last cap when finished?
    Last edited by phintz; 12-18-2012 at 11:29 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules