Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: Kitfox Christmas shopping

  1. #1
    Senior Member Dave S's Avatar
    Join Date
    Oct 2008
    Location
    St Paul, MN
    Posts
    1,835

    Default Kitfox Christmas shopping

    So many of us who fly are also outdoors folks. What better way to gather Christmas gifts than to fly to Cabela's in Owatonna, MN what with the accommodations and hospitality they provide for folks who fly in. KOWA has a really decent field, new arrival building and Cabela's will send a courtesy van to pick up arrivals at the airport; and, bring you back to the 'port when you are done shopping and eating...no charge for the van. For eating, one has a choice of venison, bison, elk, wild boar or walleye among the more usual fare. They also have a huge variety of animal mounts around the store to look at....more than I can enumerate plus an aquarium featuring midwest gamefish.

    The Notam on departure for 21D said something about "BA poor"...but one learns not to use the brakes on the KF anyway

    Our Driver from Cabela's was Mike

    A few of the animal mounts in the store

    Climbout and looking back at KOWA field

    We had a recent thread on the list regarding operating temperatures....here is what the panel says with OAT of 33F and one piece of "500 mph" tape over the oil cooler.. BTW The Ground speed as reported on the GPS is down a bit due to a 10-14 MPH headwind @ this cruise altitude.

    Lake Billsby west of Cannon Falls....the lake is the result of a hydro dam and provides a lot of recreational usage

    Pig's eye lake south of St Paul.....named after a person, not a pig....

    Turning Final back at K21D

    Back at the hangar....that is how much tape was on the oil cooler for maintaining temps...also....the "BA poor" seems not to have changed much on the ramp.

    Sincerely,

    Dave S
    KF 7 Trigear - Flying
    912ULS Warp Drive
    St Paul, MN
    Attached Images Attached Images

  2. #2
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Christmas shopping

    Hey Dave, what Page is that in your 2000c? And which info options are on your display? I usually use the map page with compass overlay.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  3. #3
    Senior Member Dave S's Avatar
    Join Date
    Oct 2008
    Location
    St Paul, MN
    Posts
    1,835

    Default Re: Kitfox Christmas shopping

    Hi Steve,

    The selection is "Digital map" from the menu.... the digital display on the left side is: Ground speed, Distance remaining, Bearing, Track, off course, travel time remaining to destination, position error. The bottom gives the current position in long/lat coordinates. It has been a while since I set this up, but, if I recall, a person can select which parameters they want to display for the digital data. These selections pretty much give me what I want.

    I always think it is sort cute that the "position error" usually runs around 25 to 35 feet....I mean what the heck....remember the error in the old Omni VOR systems?.....The GPS systems are really great compared to what we once used.

    Sincerely,

    Dave S

  4. #4
    Senior Member jrevens's Avatar
    Join Date
    Aug 2009
    Location
    Arvada, CO
    Posts
    2,152

    Default Re: Kitfox Christmas shopping

    That's great, Dave! Thanks for sharing the pictures! Cabela's in Sidney, Nebraska is a favorite destination for many of us in the Denver area. Same set-up - they send a van to pick you up and everything. Nice cafe in the store. Flying out of KBJC, it's about 1:15 in a Kitfox, 50 minutes in a Thorp.
    John Evens
    Arvada, CO
    Kitfox SS7 N27JE
    EAA Lifetime
    Chap. 43 honorary Lifetime

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •