-
Senior Member
Re: Esser's Build
Josh,
set the butt rib to the number one rib and the tabs on the fuselage need to be bent up to the butt ribs... Basically tweak the tabs to work match the butt rib.
There is also some rust remover you can get at a NAPA (auto parts) store. It's like a gel solution...
The corrosion is not un-common if the cap was sealed with tape.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules