Not quite as purdy as your area Steve...I hope to make it up there soon.
Not quite as purdy as your area Steve...I hope to make it up there soon.
Dan B
Mesa, AZ
Dan, if you come up I'll take you flying. I'll even let you fly ol' 85DD.
Steve Wilson
Huntsville, UT
Kitfox 85DD
912A / 3 Blade Taper Tip Warp Drive
Convertible Nosewheel & Tailwheel
SkySteve's SPOT Page
SkySteve's You Tube Videos
That's a deal!
Dan B
Mesa, AZ
Lethbridge Airshow yesterday and today. Its no Oshkosh or Arlington but it is 2 days of planes, jets and flying club static display. Rolled my Kitfox up to the CF-18 and took a pic before security chased me away
Nice! Between that and the CC-17 you have a pretty good photo album.
Was up cruising and seen this biplane higher up and coming at me. Pored the coal to the old Kitfox and was up 1000 feet and made the 180 to catch him. Tuned the IVO inflight and caught him. He was a bit nervous and turn down and away when I got close; I thought I was in a dog fight for a secound. So I kept my distance and moved in slower till I got this picture. I love my Kitfox.
Nicely done Mic!.... both the quick pic with the RCAF plane and the "dogfight"!
BTW.... I just ordered 16" and 20" RCAF Roundels just like the one on the CF18 in the picture. I'm putting them on each side of the tail and under the right wing.....Gotta rasie the flag!
Ackselle
Kitfox IV 1200 Classic C-GIKV
29" Airstreaks, 11" Matco Tailwheel
ROTAX 912, Hoffman HO-V352F CS Prop