just a few pic,s on the beach, the tide was super low from the phase of the moon. this is a 10 mile long uninhabited island that we land on called masonboro island.
just a few pic,s on the beach, the tide was super low from the phase of the moon. this is a 10 mile long uninhabited island that we land on called masonboro island.
Thanks for sharing the photos. Looks like a great place to explore. You have a very nice looking plane.
Steve Wilson
Huntsville, UT
Kitfox 85DD
912A / 3 Blade Taper Tip Warp Drive
Convertible Nosewheel & Tailwheel
SkySteve's SPOT Page
SkySteve's You Tube Videos
Beautiful airplane. Do you have another photo of your panel? I like what I see of it. If you do, post it in "Show us Your Panel" thread for all of our enjoyment; besides I am still trying to decide what to go with on my SS7. Thanks in advance.
Stan Inzer
912 ULS
Dynon Skyview 10"
N599KF
thank you inzersv,i have posted the panel on show us your panel but it,s been a while so here is anouther pic.
the finish on it is from a rattle can product i got from lowes for 5.99 and is as tough as nails. cant remember the name of it but will get it if you want.
Jamesmil,
I, too, like the look of that panel. The 696 is a great piece to compliment the rest of the Garmin package. I would like to know, if nobody else, what product you used to paint the panel. It gives it a soft, sofisticated (Professional) look...not to mention it's tough as nails. It looks like some type of Krylon "Rattle Can" product...i.e. "Outdoor Spaces" Textured Paint or "Make it Stone"...Khaki color. Is this correct? Looking forward to seeing more of your plane as the adventure continues.
BTW, is that 10 mile island for sale? Haha! An east coast "Kitfox Airpark" perhaps? What a great place to be able to land!
Last edited by Pilot4Life; 05-07-2012 at 12:57 PM.
Chris Holaday
Looking at the Model 5 or newer for size!
the 696 is super fine, I have one. But what about flight inst.
My turn to be envious...sweet looking shots over and on the beach. Great looking paint scheme!
Dan
Dan B
Mesa, AZ
hi pilot4life, we used rust-oleum multicolor textured, it comes in about 5 colors and is so tough mek won,t cut it after about 5 min.
a tip on labeling for switches and c/b,s. paint a smooth paint with the shade you want where you want your labels to go. after that dries use vinyl fine line tape to mask where the labels go. after the top coat is put on you can apply the labels on the smooth area. i used a brother label maker with clear label material. you might have to make a few to make it fit like you want.
go lightly with the first couple of coats as the top coat will soften the smooth paint below, thats how i know about the mek.
slyfox, sorry i meant to reply to you on the 696 on the previous reply.
we are using the g3x which has all fliight and engine instruments in one.
also the 330 transponder with traffic.
wow, that's kool. I take it you like it very much