Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Stablizer trim position sensor

  1. #1

    Join Date
    Dec 2008
    Location
    Panama City
    Posts
    1

    Default Stablizer trim position sensor

    I'm installing a Ray Allen LED position indicator and I'm having trouble locating a good position to install the position sensor since the position sensor travel form center to full up and down is is about an inch or so and the stablizer actuator is large. I know this system has been used on the model five and I need information you may have.

    I hope the first flight will be in March.

    kysilverfox
    KitFox V
    N122GF

  2. #2
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    536

    Default Re: Stablizer trim position sensor

    I have been waiting to mention several items that have been recently installed and developed. This is one of them.

    The final article is not completed and tested just yet. We did have a mock up that worked great.

    There are a couple of other items like vents with naca's that I'll update late next week.
    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"

  3. #3

    Default Re: Stablizer trim position sensor

    Have pictures on what we did posted under kitfox general discussion. flying now and has been working great.
    Dj Series 6

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •