Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Wich propeller for a Rotax 582 on Kitfox 2

  1. #1

    Join Date
    May 2009
    Location
    FRANCE
    Posts
    174

    Default Wich propeller for a Rotax 582 on Kitfox 2

    In France we use a lot of DUC propeller (French manufacturer).
    Mine is becoming old and received gravel chocks so i have to plan to change it one day.
    Just to know wich one you use on the kitfox with a Rotax 582.

    Thanks you

  2. #2
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    671

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    I've got a Model III with an Ivo Medium 2-Blade quick adjust 70". I have not flown it yet. It is easy to adjust and seems very well made. No complaints so far in my ground runs.

    -- Paul S

  3. #3
    Senior Member Monocock's Avatar
    Join Date
    Jan 2009
    Location
    UK
    Posts
    226

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    GDN

    When I had my Mk 4 with a 582 it had an Ivoprop 3 blade Ultralight prop on it. It was a great performer and the pitch adjustment mechanism is clever as all blades are pitched together with a large central nut that turns to adjust the pitch really easily. This means you don't have to individually try and get them to be all the same as it does it for you.

    I loved it and could adjust it for the type of flying I was doing. Ie if I was off on a long cruise I would pitch it up by one turn an get another 8-10 mph. If I was going in and out of short strips I would turn it back and have the best climb performance. They are not expensive either. Another good thing I found is that the blades are quite flexible which means that any small tracking disparities that might exist between blades disappear when the engine is up to speed due to centrifugal force which makes it a wonderfully smooth prop' to fly behind.

    I dont know what your approval process is like in France so please check before buying anything.

    Try and avoid a GSC Tech prop....
    Kitfox 4 (1050)
    912UL
    Based in UK

  4. #4

    Join Date
    May 2009
    Location
    FRANCE
    Posts
    174

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    Thanks for all your answers. I think i will like the easy adjust of the Ivoprop
    Wich diameter the IVO 3 blades ?
    Last edited by GDN; 03-23-2012 at 02:00 AM.

  5. #5
    Senior Member Monocock's Avatar
    Join Date
    Jan 2009
    Location
    UK
    Posts
    226

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    I'm afraid I don't know, but it might be worth sending a message to Fred Colman on this forum as he has my old prop on his Kitfox. I'm sure he'd be happy to do a quick 'spinner to tip' measurement.
    Kitfox 4 (1050)
    912UL
    Based in UK

  6. #6

    Join Date
    May 2009
    Location
    FRANCE
    Posts
    174

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    OK you will laugh but how found a member on this forum ?

  7. #7
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    click the -Community- tab at the top of the page and pull down to -Members List-.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  8. #8

    Join Date
    May 2009
    Location
    FRANCE
    Posts
    174

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    Roger

    Pm sent

  9. #9

    Join Date
    Nov 2009
    Location
    england
    Posts
    37

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    Hi GDN
    68" 3 blade IVO light on Kitfox Mk 2,582 c/w 3-1 reduction could not be faulted.The IVO light comes in two adjustment ranges,and I do believe that the coarse range would be the best choice for 3-1 or higher.Mine being the finer range,needs to be very nearly fully (coarse) adjusted to obtain 6,200 rpm static.I got great info from the members of this forum when I was looking to change from GSC,thanks guys .

  10. #10

    Default Re: Wich propeller for a Rotax 582 on Kitfox 2

    Hello!

    I've got a GSC 68" 3 blade prob with 3:1 reduction at 6200 rpm static at mine Kitfox III with 582 greyhead.
    It works with 18 Degree at 75%, 1000-1200 ft/min, 125 km/h at 5800 rpm and 13L/hrs. Also the woodprop looks great....

    Olaf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •