i saw this service buletin on rudder cables, my question has anybody done this with everthing covered? i see pulling the cables out but putting them back might be a little tricky. specially in the tail section.







Cable sizes of less than 1/8" require only one swage crimp. However, cables 1/8" diameter and larger require MULTIPLE crimps for the swage joint to achieve full strength. Use of 1/8" diameter cable has been standard on Kitfox's since early 1993, and it is the intent of this service bulletin to urge you to inspect all nicopress sleeves on your aircraft for proper installation and to complete any unfinished cable swaging.