Help needed.


Looking for info on wiring the remote switch for an Artex ELT-200.


My ELT has a ROUND four pin connector with the pins in a square pattern. Not the phone jack. Not the 9 pin DIN jack.


If you have an Artex ELT-200 unit in your plane or a manual in possession I need the pinouts for the round plug to the switch.


Yes… I tried the obvious contact to Artex and their website. They no longer support the ELT-200 because it is a 121.5 -243.0 ELT even though it is perfectly legal to buy, sell, install, or transmit. All manuals and diagrams for the 121.5/243.0 beacons have been pulled from their website.


I also looked around my local airport. So far no luck but I’ve only looked at four airplanes. They all have ACR units. So I'm posting on the forums.


JP