Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Results 1 to 9 of 9

Thread: Artex ELT-200 pinouts

  1. #1
    Senior Member jtpitkin06's Avatar
    Join Date
    Jan 2010
    Location
    Greenville, TX
    Posts
    646

    Default Artex ELT-200 pinouts

    Help needed.


    Looking for info on wiring the remote switch for an Artex ELT-200.


    My ELT has a ROUND four pin connector with the pins in a square pattern. Not the phone jack. Not the 9 pin DIN jack.


    If you have an Artex ELT-200 unit in your plane or a manual in possession I need the pinouts for the round plug to the switch.


    Yes… I tried the obvious contact to Artex and their website. They no longer support the ELT-200 because it is a 121.5 -243.0 ELT even though it is perfectly legal to buy, sell, install, or transmit. All manuals and diagrams for the 121.5/243.0 beacons have been pulled from their website.


    I also looked around my local airport. So far no luck but I’ve only looked at four airplanes. They all have ACR units. So I'm posting on the forums.


    JP

  2. #2

    Default Re: Artex ELT-200 pinouts

    Did you ever get an answer to how to wire the ELT 200 i recently purchased one for my project and need to find out how to wire it. Also is there any pdf manuals that I can download for this ELT.

    Thanks Robert

  3. #3
    Senior Member jtpitkin06's Avatar
    Join Date
    Jan 2010
    Location
    Greenville, TX
    Posts
    646

    Default Re: Artex ELT-200 pinouts

    Quote Originally Posted by High Country View Post
    Did you ever get an answer to how to wire the ELT 200 i recently purchased one for my project and need to find out how to wire it. Also is there any pdf manuals that I can download for this ELT.

    Thanks Robert
    Nope... never got an answer. I put it on the back burner for now. I plan to get out the meter and figure it out myself. When I do I'll post it here. Give me a week or so.

    John

  4. #4
    kebopa3's Avatar
    Join Date
    Jul 2012
    Location
    Port Angeles, WA
    Posts
    40

    Default Re: Artex ELT-200 pinouts

    John, Robert,
    This may not be of any help but thought I'd try.
    Kebo
    Attached Files Attached Files

  5. #5
    Senior Member jtpitkin06's Avatar
    Join Date
    Jan 2010
    Location
    Greenville, TX
    Posts
    646

    Default Re: Artex ELT-200 pinouts

    Kebo,

    Thanks... just what I needed. That diagram shows the 4 pin connector.

    John

  6. #6

    Join Date
    Nov 2011
    Location
    OR
    Posts
    83

    Default Re: Artex ELT-200 pinouts

    Looks like you have it covered , but maybe this will help.

    Dutch 004.jpg

  7. #7
    Senior Member jtpitkin06's Avatar
    Join Date
    Jan 2010
    Location
    Greenville, TX
    Posts
    646

    Default Re: Artex ELT-200 pinouts

    Thanks Dutch, that helps, too.

    JP

  8. #8

    Join Date
    Aug 2014
    Location
    Park Valley, Utah
    Posts
    1

    Default Re: Artex ELT-200 pinouts

    I've been trying to wire a toggle to operate the ELT 200, not that I'm cheap or anything but my panel had room for an LED and mini locking toggle. I can get the LED to light when the ELT is ON but I can't get the toggle to switch the ELT ON.
    Thanks for any help here.

  9. #9

    Join Date
    Jul 2015
    Location
    Caledon, Ontario
    Posts
    1

    Default Re: Artex ELT-200 pinouts

    Kangus,
    Did you manage to get your remote ELT to work?

    I have en ELT-200 but need the switch assembly for the panel and I'll make up a cable.

    Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •