Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 15

Thread: Jan '09 KOTM - Steve Kellander

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator RandyL's Avatar
    Join Date
    Mar 2008
    Location
    Woodinville, WA
    Posts
    207

    Default Jan '09 KOTM - Steve Kellander

    100_0171.jpg

    Steve Kellander (DesertFox4)
    2003 Kitfox Classic Model 4 - Tri-gear, widebody, Polytone Orange/Yellow paint
    Rotax 912ULS, Ivo in-flight adj. prop.
    As of Jan '09: 635 hours since new.

    My Kitfox story began in 2002 when Phil Laker and I headed up from Phoenix to Caldwell, ID in Stan Fosters Dodge truck with a rack made just for hauling a Kitfox fuselage. Phil and I had been up a month or so earlier when John McBean sat down with me and worked out a deal for a Model 4 fuselage only kit. John had it powder coated white for me.
    The previous summer Phil and I had made a trip to California, near San Francisco, to pick up a partially built model 4 kit Phil had purchased. Phil offered to sell me the wings (built about as far along as the factory quick build option) from that kit for my project. That saved a fair amount of time on the wings. That same summer I had helped Murle Williams build his new shop and he was good enough to offer me a bay in the shop to build my Kitfox . That was great because Murle has every tool, jig and template known to man to build Kitfox aircraft. Murle is an A&P and an EAA Tech Counselor. I was in the Mecca of Kitfox construction .
    I started construction Feb. of 2002. 1600 hours later my first flight was October 4th 2003. My log book shows 7.1 hours flying on the 4th of October 2003. I do remember a lot of turns over the top of DeerValley Airport that day. The weather was great of course and the Kitfox flew great as evidenced by the 7.1 hours the first day.
    CopperState was coming up so I had to "work" hard to get the 40 hours flown off in time to be legal to fly to the airshow with 19 other Kitfox. That was probably a world record for number of Kitfox (twenty) in one flight. By evening of 10/10/03 I had flown off the 40 hours required and taken it through it's aerobatic flight tests. Spins, rolls, loops and stalls were recorded in the log book.

    Mods are as follows:
    1. Wide body
    2. Large baggage compartment
    3. Hidden shot gun case in tail accessible from the baggage compartment (great for guns, fishing rods, wing folding rods, etc.)
    4. Smoke system
    5. Internal mounted ELT antenna , two comm antennas in the vertical stabilizer
    6. All Speedster tail mods. but long wings for better take offs and better high altitude cruise
    7. Clear wing tips
    8. Custom upholstery with inflatable lumbar in the pilots back cushion
    9. LED nav lights with tail light mounted inside the skid bar
    10. Ivo in-flight adj. prop
    11. Smooth cowling
    12. Extra set of rudder cable pullies in the tail so rudder cables come out of fuselage closer to the tail like newer models (looks much cleaner)
    13. Razorback - cromoly tubing welded from just behind turtledeck to the leading edge of the vertical stabilizer
    14. In flight camera system (up to 4 cameras) with a 4" color tv screen in right side panel
    15. Underseat tool boxes
    16. Gas cap fairings
    17. PVC Strut fairings
    18. Glove box, lighted with LED's inside
    19 Whelen wing tip and one belly strobe (Whelen emergency vehicle strobe kit from Ebay) same quality 1/2 the cost with 7 different flash patterns and two power level settings
    20. Wing tip landing lights inside both clear wingtips plus a taxi light on bottom of cowling
    21. LED backlit fuel site tubes (even makes daytime reading easier)
    22. Lighting strip for instrument panel
    23. One of a kind lower profile instrument panel surround (plastic), also has avionics tilted toward pilot for better viewing
    24. Seaplane drain grommets entire aircraft just incase
    25. One piece firewall with extension under pilot for extra protection with recess for engine oil sump tank so it sits low enough to use the smooth cowling
    26. Back up electric fuel pump
    27. Trough the hub prop controller
    28. Gas operated door struts located to rear of doors
    29. Tinted all lexan turtle deck
    30. Cleveland wheels/brakes
    31. Dual rudder/brake pedals
    32. Custom rudder pedals
    33. Center console
    34. Large elevator with electric trim tab

    Avionics:
    MicroAir transceiver & transponder
    Garmin Pilot 3 GPS
    Intercom
    GRT EIS engine monitoring system
    Electric turn & bank

    Flight stats:
    Cruise 115 mph at 5.3 ,gals. per hour
    Cruise 120 mph at 5.7, gals per hour
    Cruise 125 mph at 6.1, gals per hour
    Take off roll average 150 to 200'
    Top speed level flight solo with full fuel no baggage 132 mph, 7.1 gals per hour
    Stall no flaps 45mph, with 1/2 flaps 42 mph
    Shortest landing (so far) 135'. Blacktop strip 1/2 flaps low approach with power no obstacles
    Average climb rate 90 degree day 1200 to 1300 fpm.
    Service ceiling not found yet. Highest flight 12,500' so far.
    Empty weight 661 lbs
    Does very nice loops, ok rolls and spin recovery is quick in about 3/4 of a turn
    Very effective rudder and elevator
    Light control pressures

    The aircraft has exceeded all expectations.

    I was fortunate to have some of the best Kitfox experts available to help with the build, modifications, and special parts. A specail thanks to Phil Laker, Murle Williams, John McBean, Michael Holm, Michael Gibbs, and Stan Foster for their help and support and thanks to wife Nancy and son Jake for all the time spent away from home.

    Col. Steven J. Kellander
    Desert Fox Squadron
    Phoenix, AZ

    100_4642.jpg
    Steve's-Kitfox.jpg
    Steve's Kitfox in flight mountains_edited.jpg

  2. #2
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Re: Jan '09 KOTM - Steve Kellander

    Steve,
    Nice writeup...and certainly a nice plane. Steve gave me my first Kitfox ride 4 years ago. That was the most expensive ride I have ever taken as I am now building one just like it. I have flown with Col. Kellander twice from Phoenix to Homedale, ID. The performance, responsiveness and pure fun is simply great!
    Dan B
    Mesa, AZ

  3. #3
    Administrator RandyL's Avatar
    Join Date
    Mar 2008
    Location
    Woodinville, WA
    Posts
    207

    Default Re: Jan '09 KOTM - Steve Kellander

    I don't know what he did in building it but Steve's 4 sure does fly well. He was kind enough to give me a ride at last year's Factory Fly-in and wow, from the moment I took the stick I noticed it felt very good. Very responsive and smooth, and don't those cruise numbers look a little better than normal? (And he doesn't even have wheelpants)

    Steve is a real Kitfox supporter too, always doing what he can to help builders and folks new to the Kitfox world. Of course he does duty here too as a TK.com moderator.

    Nice work Steve!
    Randy Lervold
    TeamKitfox.com Admin Emeritus
    Day job: www.dynonavionics.com

  4. #4
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,563

    Default Re: Jan '09 KOTM - Steve Kellander

    Thanks Randy for the honor of KOTM. TeamKitfox has really taken off due to your hard work and dedication and it's great to be a part of this new community. Thanks again for letting me park my humble little Kitfox amongst those beautiful Kitfox of the preceding KOTM's. It may never win a beauty contest but as you can attest Randy, it is a blast to fly, but then aren't they all.

    Dan, always great flying with you as we did today. Sorry about that expensive first ride. No I'm not. The next flight to Homedale,ID (Kitfox Aircraft's 25th anniversary Labor Day fly-in) will be with your Model 4 out front. I know you know the way now. Keep at it a little every day and you will be flying off your 40 hours sooner than later.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  5. #5
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,327

    Default Re: Jan '09 KOTM - Steve Kellander

    Steve,
    I have the model 4 with speedster wings. My question, I thought the 4 had I think a VNE of 125mph. I see you have a top speed of 132mph. Did you do something different to go this speed?
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

  6. #6
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,563

    Default Re: Jan '09 KOTM - Steve Kellander

    Steve,
    I've seen several 4's with the 140 vne.
    I believe the vne on the model 4 was predicated on the thickness of the windshield material used not the length of the wings. John McBean might be able to shine more light on this. The thinner windshields would start to deflect (push in ) at a lower speed . Mine will start to deflect very slightly at 140mph. . When I was building the model 4 in Murle Williams shop Mike Gibbs was building an almost identical version and his was also 140 vne. Both of our 4's had all the speedster mods except mine had the longer wings. Mike's by the way would hit 140mph straight and level at full throttle. His had wheel pants and the medium Ivo prop with a large spinner on it.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •