Thanks for posting this tutorial T J. After a few landings in my recently purchased model 2 with my instructor we knew something was bad wrong. It would make some un-commanded turns to the right and rudder was ineffective at keeping it running down the runway in a straight line. I performed the alignment, had a 3/8" toe in on left main and a 3/8" negative camber. I bent the axle until I had both at 0". I also learned the Maule tailwheel was unlocking with full left rudder so I replaced the tail wheel with a new Matco 8" pneumatic wide tailwheel. My tail spring was also bent so I replaced with the new 3 spring version which after installation, I realized the spring was canted to the right. We built a shim to correct the spring and installed it on top of spring. All 3 things, alignment, tailwheel and spring mounting was causing the aircraft to turn right. Now that all of that has been corrected, it is WAY easier to control. I solo'd shortly after correcting these issues.