-
Senior Member
Re: Building tips and hints
When mixing small batches of Hysol, epoxy or two part fillers, I like to use paper cups. The hot drink type without the wax coating works best.
I cut the cups with scissors at an angle prior to use. the angle cut allows easier access for the stirring stick and keeps the product off my fingers.
If desired, I fold over the pointed high side and use it for a handle.
My favorite mixing paddle is a tongue depressor. I cut the end square with scissors so it will get into the corner of the mixing cup.
John Pitkin
Greenville, TX
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules