How to quieten down a 582

[Grant]

Hi
This is a photo of the exhaust with the "pin" and the hole. As you can see the pinhole is in the outer skin, I'm not sure if I need dent or drill the inner skin.
The clamp is not in its final position, I'll position it over that hole and tighten it up

Thanks

[t j]

Grant, open this link to the Rotax manual and scroll to section 10.2 http://www.google.com/url?sa=t&sourc...U66zwA&cad=rja

It shows a good picture diagram and instructions to locate and drill the hole needed for the pin.