-
Seat pan/rudder cable interference
Has anyone experienced the problem of the pilot's left rudder cable rubbing the pilot side seat pan, just in front of the pulleys? My seat pan is trimmed and seems to fit and lay in place just fine. That looks like the only close area in the cable runs.
Dick B
-
Re: Seat pan/rudder cable interference
Is the cable routed through the welded tabs on the frame? The reason I ask is that I don't think my cables even come close to the seat pan. If memory serves right, I think my cables are only an inch or two off the bottom of the frame. What model do you have, mine is a Series 7.
-
Re: Seat pan/rudder cable interference
Sorry, should have said this up front, my model is a SuperSport. The area in question is in front of the lift strut carry through pulley group (rear of the seat pan). Just rechecked the routing and all is well there.
Dick B
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules