Same engine no problem i only obstruct part of the radiator with aluminium adhesive tape, on the other hand i suffer with difficulties to initiate it in cold weather and you ?
Same engine no problem i only obstruct part of the radiator with aluminium adhesive tape, on the other hand i suffer with difficulties to initiate it in cold weather and you ?
Hi 924549
The thermostat in my 582 is stamped 8-93 130 .Keeps temp right,all UK seasons,no messing with rad covers.MNFlyer has the answer
![]()
Hi all, does the thermostat bolt on to the engine block or can you use an inline thermostat and which way is the better way to go.Should I be able to order on from a local rotax snowmobile dealer?
Thanks Willis
Hi Willis, no inline thermostat, it fits in the engine cylinder head housing very simple to install, there is a NAPA P/N but I don't have it, but I'm sure you can get one at a Rotax snowmobile dealer that's where I got mine many years ago.
http://www.ultralightnews.com/engine...ostatintal.htm
Last edited by Mnflyer; 01-03-2011 at 04:46 PM.
GB
Flying a HKS Kitfox III and a Champ
Picked this from an old post ...Napa Thermostat part # 18-3558
I dont remember the temp for this therm, but should be 160 deg
I run this thermostat in my gray head and the water temp stays on 160
wether the plane is pointed up or down
Last edited by akflyerbob; 01-04-2011 at 03:39 PM.