Joe - I started with a lead I picked up on this forum and started by ordering one each of five or six different styles and shapes from one of several potential suppliers. The short version of the story is I learned that several suppliers call the same product their part but if you peel the onion just a bit you'll find that they all are from the same Chinese manufacturer AND at a wide variety of prices. Anyhow, I ended up with these: https://www.waytekwire.com/products?pSearch=47695.

You can find them elsewhere for north of $4.00 each.

You can wire them so the light is on or not - I measured the current draw for kicks and it was pretty close to nothing. (0.24 Amps if all 12 switches are on at the same time.)

I've attached the spec sheet as well as the Knuckel's writing that convinced me that with the low power stuff we have in our panels now-a-days, these switches should work just fine.

Panel switch bought from Waytek.pdf

Switch_Ratings Aero electric.pdf

Cheers,

Darrel