Cool, that seems to be the one most people use. Very nice mount.
Cool, that seems to be the one most people use. Very nice mount.
There are some earlier pictures in my build thread, but now everything is in.
--Brian
Flying - S7SS
I love the start button!
Russ
Model IV Speedster
912UL IVO IFA
RV6A
Needle, Ball and Airspeed
Maybe a little GPS
Brian, that is Sweet! Not long now and you'll be airborne!
Clark
Looks really nice!
Dorsal ~~^~~
Series 7 - Tri-Gear
912 ULS Warp Drive
I like that start button also. I was not able to locate one that didn't say "engine start/Stop". so, just a red button for me.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Start button for Eddie
(Funny that I recently ordered a stainless one and a black one, just to give me the option with a carbon fibre wrap on the panel)
Last edited by PaulSS; 10-17-2018 at 05:54 PM.
Thanks Paul. At this point Im kinda growing tired of redoing stuff I have already finished. The latest was the over head shade. I may order this for a future replacement but I also have an issue with getting the LED lit because I have a vertical power for my circuits. I'll spare you the details but it isn't so straight forward and I am no electrician. thank you for the link though. I may still buy that.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Details about the Vertical Power please. I'm interested in them for my build.
Thanks,
Clark
Haha, I can understand where you're coming from, Eddie, especially with the problems you've had with your harness.
A couple of things to consider:
(a)Don't bother with the LED lighting
(b)It would be a straight swap for the starter button you have, so no new wiring
(c)If you really did want the LED then all you have to do is pick off a supply from any live (even your master solenoid before it goes to the VPX) and then the other terminal just goes to ground. It's not powering anything but the LED in the switch housing, so it'll draw a teeny current.
But I can empathise with the fact that you don't want to change stuff