Show us your panel

[jrevens]

Those both look very nice, Josh and Eddie. Eddie - did you know that the FAA has changed the required wording on the passenger warning placard? It is actually a little simpler and leaves out the "Amateur Built" part of the statement. The new required wording is - " Passenger Warning - this aircraft does not comply with Federal Safety Regulations for standard aircraft."

I'm not sure if it's true, but I've been told that inspectors from now on will require the new wording. Any aircraft inspected and approved prior to the change don't have to make the change.

[efwd]

AAHHHH! no I didn't know that. Back to the decal maker I suppose. Should be easy to change. I spent untold hours trying to get these decals made. White ink was almost undoable so on that particular decal you will notice that its silver and not white. The metalics are easy to produce and thankfully they come off pretty easily with alcohol. Thanks John

[efwd]

Hmm, AS&S hasn't got the new Passanger Warning. Still selling the old I guess. Dang it.

[jrevens]

You should confirm that it's necessary before you remove yours, Eddie. I've got the old one too, and I haven't talked to my DAR about it yet. Someone supposedly knowledgeable about it told me mine would have to be replaced.

[colospace]

Finally got may panel and console labeled (placards from a local mom & pop shop that John Evens put me onto). Day VFR; Dynon everything.

[efwd]

Very nice. I love those radios. I really like the way you did the fabric on the center console slots. May have to copy you. Can you educate us on the USB port and the ports just below that? I would like to wire in the USB too.
Eddie

[av8rps]

Beautiful! I'm jealous