i know ive read it on here , but cant locate it . i need to know what anyone is using for wing tank fuel cap seals ? i think i have one not sealing up too well as im getting some stain on the top of the wing and possibly some fuel transfer . thanks
i know ive read it on here , but cant locate it . i need to know what anyone is using for wing tank fuel cap seals ? i think i have one not sealing up too well as im getting some stain on the top of the wing and possibly some fuel transfer . thanks
chuck
kitfox IV 1050
912ul warpdrive
flying B , yelm, wa
I got replacement seals at my local John Deere dealership. Just bring In the cap to match up the correct one.
Last edited by RIVERFOX; 10-08-2010 at 01:46 PM. Reason: spelling
Kurt
4-1050
80hp
Warpdrive
Osceola, Wi.
Bingo.... the quick read is go to an implement dealer or farm supply place - the KF fuel caps are basic tractor technology and that shouldn't cost too much.
BTW - I also use a fuel funnel for the KF that fits an international M gas tractor......
Simple is good....
Dave S
Got mine from the local FBO for $5 each, they are for a Cessna 150.
(Chose to support the local FBO.)
I've been using leather for years.You can get a thick piece from a textile shop or tack shop. I use the old gasket as a template and cut a new one from the thick leather. Ethonal dosen't affect it and last for years.
Hope this helps, Lion8 (Tom)
thanks for all the good ideas, im sure ill get one of these to work for me .
chuck
kitfox IV 1050
912ul warpdrive
flying B , yelm, wa