Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: Elevator Trim

  1. #1
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Elevator Trim

    Hey everybody,

    as I try to finish my 4 Speedster I need to reconnect my elevator trim.

    It looks like a MAC system from Ray Allen.

    It's from around 1996 and no markings or labels are posted on it.

    Has anybody a wiring diagram for such an old system?
    The servo has 2 white cables and 2 orange cables coming out, thre is a position indicator with 2 red LED and one green LED, and a 3 position rocker switch for actuating the trim.
    There is also a small black box where several cables go in and come out.

    Please help ;-)

    Tuna

  2. #2
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Re: Elevator Trim

    Tuna,
    If you can post a photo of your unit folks will identify it easier...good luck
    Dan B
    Mesa, AZ

  3. #3
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: Elevator Trim

    Sure that will help.... :-)

    Putting them online right now::
    Attached Images Attached Images

  4. #4
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: Elevator Trim

    Hello,

    is there nobody who can help me ??? :-( with the trim system

    Cheers Tuna

  5. #5
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,562

    Default Re: Elevator Trim

    You've probably been to this page already but just in case:
    http://www.rayallencompany.com/RACin...lications.html
    it's all I could find on their products on line.


    instructionsT2andT3.pdf

    instructionsRP3.pdf

    If neither of these pdf's shows your set up here is Ray's phone number
    760-599-4720

    Give them a call and maybe send them your photos and see if they can help out.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  6. #6
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: Elevator Trim

    Hey, thanks.

    Yes I have been to this page already and there is no valueable information for me there.

    Since the system is at least from 1996 or so, there is no info about it and I couldn't find any old files :-(

    So maybe someone knows how to connect the wiring.

    Cheers
    Tuna

  7. #7

    Join Date
    Oct 2009
    Location
    sauk centre mn.
    Posts
    5

    Wink Re: Elevator Trim

    i have all the directions for hooking all this up. what you have is a mac system. mac was bought out by ray allen a few years ago. i have talked to him short time back he told me that all the components in the systemare identical to the mac even all the wires are color coded the same. if you need copyes e mail me at jdhage@hotmail.com and i will copy and send to you.
    jflyer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •