F/S: CZAW 1200 Amphibs

[dholly]

Like new factory built amphib floats. Multi bulkhead 6061T6 w/ solid bucked and closed blind rivet construction. Gorgeous Metalflake Silver Gray Imron w/ Clearcoat paint. Incs turnkey rigging for Rans S7 install with exception of the rear strut to fuse fittings, ie. streamlined spreader bars and Z-struts, cross cables, hdware, hyd. hand pump, valving and selector, hyd/brake line etc. Very low hours when removed and put into climate controlled indoor storage. You won't find a nicer set. https://www.barnstormers.com/classif...t-Package.html

001 (2).jpgDSC01692 - Copy.jpgDSC01691.jpgDSC01684.jpgDSC01685.jpgDSC01687.jpgDSC01689.jpgDSC01690.jpgDSC01695.jpg

[WWhunter]

What's the weight of these?

[dholly]

What's the weight of these?

I've not personally weighed them but feel they are lighter than my Aerocet 1100A's were at 227lbs. with rigging. I do know someone who has owned and flown both confirmed this is true as well. As a good reference, Zenair notes their very similar displacement amphibs weigh 93lbs. per float, 33lbs. for rigging (spreader and Z-strut bars and end fittings and cross wires with turnbuckles), and 5.5lbs. for hyd. pump, valves, fittings, reservoir and fluid.

[dholly]

I neglected to mention?

For any TeamKitfox member, I will include a KF 3-4 ventral fin. I think the thru tube measure may be different but same offer for 5-7 owners if they want it.