Confusion on Wing Fabric Installation

[LetMeFly]

...The girl on this series of youtube videos does amazing work.

One tip that I used which deviated from the manual, was her tip of diluting the poly tak 50/50 with MEK. She dilutes, and then paints 2 coats on, lets it dry, and the then lays the fabric down. She then brushes over the fabric with the 50/50. This activates the painted on glue and really gets a good soak through the fabric....

Yes! I've seen her videos too (I watched a lot of videos before trying this. Which might be part of the problem ). I re-watched some of her videos today, slowed down by half, and it does look like she gets good penetration of the glue in the fabric. I had a problem with that in the first go but maybe I needed to thin it just a bit more, so I may try it that way.

[LetMeFly]

I've updated the document a bit, and gave it a "Rev A". I'll be using it as a sort of checklist to go through as I do the wings. Maybe someone else might get some use out of it!
Poly-Fiber Wing instructions reformatted Rev A.pdf