Quote Originally Posted by Jerrytex View Post
It would help to know what parts, specifically you are confused about?

The polyfiber videos on you tube show an actual kitfox wing being covered, step by step.
Yes, I watched those videos several times. He doesn't do it like the Kitfox manual though. He even does some things different than the Poly Fiber manual! Like applying an iron at 350 deg on a glued surface, which can ruin the glue according to the polyfiber manual!

My confusion was in going back and forth in three different sections of two different manuals and doing one thing from one manual, that conflicted with another part of another manual, etc. My lower fabric was so messed up that when I finally decided to rip it off, I could then see how badly I did it. Like only about 75% of the TE was glued down, even though the glue was soaked into the fabric! Don't ask me how that happened.

I'm just asking if anyone sees anything missing or wrong from my attachment write-up. I'm using that next time, after the coat of varnish that I had to re-apply cures in a few days.