It's not between the flashing and airframe like a sandwich. It's inset, or flush with the airframe to the aluminum flashing.
You should be able to remove or install them later.
Re: Quarter Window
It's not between the flashing and airframe like a sandwich. It's inset, or flush with the airframe to the aluminum flashing.
You should be able to remove or install them later.
🇨🇦CANADA
Flying | SS7 | G3X | Edge 912
Re: Quarter Window
Ok, that's what I was trying to confirm. Makes sense. Thanks!
If anyone has any pictures you would like to share, myself and I'm sure others would appreciate.
Todd Swanson
Tremont, IL
S7 STi build in progress
Re: Quarter Window
Will these help?
Rear window dry fit outside.jpgRear window dry fit inside.jpg
See my build log at:http://www.mykitlog.com/lowandslow/
Re: Quarter Window
We just used 3m 2 sided tape and attached the windows after frames where covered with oratex. Clean look IMO. No issues with either plane.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
Posting Permissions
Reply With Quote