Good morning,


  1. Are there any sort of standard or common plans for wing and fuselage rotisseries? I've built a wing rotisserie, but it's generally bulky and likely overbuilt.
  2. Can someone point me to a high level build sequence overview. I finished my fuselage, and I am starting on my wings, and one thing that bugging me is push-pull rod adjustments. I've looked ahead and see that's done during Final Assembly. It makes sense that I can't adjust the rods until all control surfaces are in place, but it seems like this would be much easier to do while there's no fabric on the plane.
  3. And, I have a similar question for other assemblies. There seems to be lots of instances of installing parts to aid with assembly, and then parts are removed and then re-installed after everything is covered in fabric. However, once things are covered in fabric, reassembly is going to be a booger.


Thanks,

Steve

PS - apologies if these are old/tired topics, but searching this site is a challenge.