I have trimmed the windshield around the forward carry through tube only enough so as I can mark and trim for the forward vertical angles, but I am unsure were the forward and aft position of the windshield should be, at the moment I have trimmed enough so as the aft portion of the windshield is in line with the rear of the carry though angle, the manual says to trim the aft edge of the windshield to match the angle, My question is what is the correct position for and aft do I need to trim more around the carry through tubes and then trim the rear of the windshield as there is quite a gap were the aft corners bend up?
Windshield Forward and Aft Position
Reply With Quote