Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Flybox APR1 - Fully Auto Prop Controller

  1. #1

    Join Date
    Apr 2023
    Location
    Okanagan
    Posts
    50

    Default Flybox APR1 - Fully Auto Prop Controller

    http://www.flyboxavionics.it/controllers.html

    Looks like a compelling alternative to the Airmaster. Has anyone here dabbled in this yet? DUC Props has it up on their website as well, so fair to assume their props play nice with it. Single lever control.
    Attached Images Attached Images

  2. #2
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    671

    Default Re: Flybox APR1 - Fully Auto Prop Controller

    I formed my thoughts on Italian engineering when I owned a Fiat 850 Spyder. That plus the banner "(Single Lever Engine Concept)" on their web page says, maybe this should stay in the oven a while longer to fully bake.
    -- Paul S
    Model III SN910
    582 IVO Med

  3. #3
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    869

    Default Re: Flybox APR1 - Fully Auto Prop Controller

    Apparently they don't sell this unit directly to builders. The product page says this: "The instrument must be set up according to the type of aircraft, engine and propeller, which is why only authorised [sic] installers may proceed with installation."

    You can enter all of your personal contact information in a web form to have them contact you about the nearest authorized installer.
    Last edited by Eric Page; 05-09-2023 at 06:14 PM. Reason: Add link.
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •