Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Rotax 912is ECU Location

  1. #1

    Default Rotax 912is ECU Location

    Reading the 912is install manual from Kitfox, it says in the Electrical Section I, Step 11, to "Square the unit on the tray and ...". I don't see anything in the Rotax manual about installing the ECU with a certain orientation, so putting it at an angle should not be a problem. Has anyone else installed the ECU "not square" on the tray? I can fit it on the tray much better at an angle, because of the heater core being in the way a bit.

    Thanks!
    Greg Anderson
    7SS in "production" : https://eaabuilderslog.org/?s=ganderson
    Richland, WA

  2. #2
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default Re: Rotax 912is ECU Location

    I mounted mine at an angle.
    Eddie Forward
    Flying
    SS7, 912iS, Garmin G3X

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •