Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: It's always darkest before the dawn

  1. #1

    Join Date
    Dec 2019
    Location
    Idaho
    Posts
    89

    Default It's always darkest before the dawn

    Any year now I will finish the wiring . The hard thing to do is get the 2nd end of a cable at the exact right length so that all the bundles
    look clean and routed nicely. I think I have used 50 lbs of adel clamps (the bane of my existence).....so far.

    Victor
    Attached Images Attached Images
    Building SS7
    915iS
    Garmin G3x

  2. #2
    Senior Member bbs428's Avatar
    Join Date
    Jan 2015
    Location
    SW Missouri
    Posts
    506

    Default Re: It's always darkest before the dawn

    Exactly!

    Kinda like sausage making. No way to look good in the middle of working on it. I have had to re-do so many bits of the wiring, that I had to order more wire, more connectors, more heat shrink and more waxed flat string. I just wasted so many resources not getting it right the 1st time, or even the 2nd time!

    It'll look nice when you're all done... Now back to work!
    Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive. Ernie Pyle

    Brett Butler
    Building: 1998 Model 5 Outback, 912ul 110hp, G3x and 7 mods

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •