I think I'm right on the basic wiring of this used 912ul engine, but I have zero experience. I have read the install manual and that helped. I have tried to bring up wiring diagrams from the past (1993) with no luck

Here's what I have:

1. Of the two wire bundles coming from the port side of the internal generator, one has two feeding shielded brown wires, approx. 26" long both with sockets for the rectifier.
From the install manual - Feeding wires from the generator to rectifier-regulator on left side of ignition housing 2 flexible cables, 1.5 mm2 yellow (in shielding metal braid) length approx. 660 mm (26 in.) starting from ignition housing• with on each plug socket 6.3 x 0.8 to DIN 46247.
I'm assuming these are the regulator feed wires?

2. On the other is a smaller bundle of two wires, alongside the regulator feed wires, both white - one with red stripe, one with green stripe.
Manual states - 2 flexible cables 0.5 mm², white/yellow and blue/yellow in insulation wrap.
I'm assuming that these are the tach wires?

3. I have the older 4 plug electronic box connectors. There is an empty socket next to each connector. I'm assuming these are for ignition circuit A and B?

Comments?

IMG_1211.jpg
IMG_1212.jpg