Anyone know of a source for these in the United Kingdom?912ULS Engine Mount.jpg
Anyone know of a source for these in the United Kingdom?912ULS Engine Mount.jpg
Do you have part numbers? I might have a set which is surplus to my needs.
Kitfox 5 (under construction)
Commercial SE/ME, CFII
I believe Kitfox ships the Lord J-3608-1, with their in-house part number 90048.000. That's what was on the packing list for my 912iS firewall forward kit.
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
Then yes, I'm all but positive I have an unused set.
Kitfox 5 (under construction)
Commercial SE/ME, CFII
That might prove very useful. thanks.
However, one of my contacts in the UK reckons it is not this Lord Mount.
He says that he is 99% convinced that every Kitfox 3-5 with the original Kitfox 912/912S installation uses the "damping donuts" from the Kitfox parts catalogue (Replacement Isolator Kit, Part# 64804) even though this is marked for Models 3 & 4 in the catalogue!
Any comments?
You're going to need someone smarter than me (I suggest Brandon) to sort that out. I think Eric and I are both picturing the mount you would get now if you ordered one for a ULS to fit a series 5-7. I can tell you the mount for the 4 and 5 have a different hole pattern at the firewall but I don't have any clue what the Skystar people were thinking in the late 90s.
Kitfox 5 (under construction)
Commercial SE/ME, CFII