Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Engine mount donuts

  1. #1
    Bryan's Avatar
    Join Date
    Oct 2008
    Location
    Collinsville, OK
    Posts
    105

    Default Engine mount donuts

    With the 912 in a model lV does a guy have to remove engine to replace the donuts on the engine mount? Mine are getting weak so I need to replace them. Just wondering how much of a task this is going to be. Thanks for any help.

  2. #2
    Senior Member JoeRuscito's Avatar
    Join Date
    Jun 2018
    Location
    Charleston, SC
    Posts
    361

    Default Re: Engine mount donuts

    I don't know the IV well but I just did mine in my 7, top and bottom, easy to do with the engine on. Used a engine hoist to unweight the engine, did the bottom first, leaving the top bolts in place. Then did the top.

  3. #3
    Bryan's Avatar
    Join Date
    Oct 2008
    Location
    Collinsville, OK
    Posts
    105

    Default Re: Engine mount donuts

    Thanks Joe. I did get mine done the same way.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •