Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Leak from Fragola Fitting

  1. #1
    tdldedcd's Avatar
    Join Date
    Nov 2019
    Location
    Murrieta, CA
    Posts
    69

    Default Leak from Fragola Fitting

    Making fuel lines today. I am getting air leaking by the little ball valve on the fragola fittings. Has anyone else had this issue and what did you do about it? I have a good snug fit on the nuts and no air is coming from the joints. Only this little ball value.

    Thanks for your help.

    Todd
    Todd Downing
    SS7 458LK
    Building
    G3X
    915is, Airmaster prop

  2. #2
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: Leak from Fragola Fitting

    I had one leak after the first run that was tight but I tightened it more and it quit. Make sure there's no surface scratches or something like that. If not get another end while it's out where you can work on it for sure.
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •