Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: cabane gear

  1. #1

    Join Date
    Mar 2018
    Location
    Lynden, WA
    Posts
    14

    Default cabane gear

    Replacing the bungee gear with the cabane system and curious if any of you could shed light on the recommendation to have a 4 degree angle inward cant on the wheel. Thanks!

  2. #2
    Senior Member rv9ralph's Avatar
    Join Date
    Aug 2014
    Location
    Greenleaf, ID
    Posts
    618

    Default Re: cabane gear

    Are you talking camber or toe?

    Toe should be 0 degrees. Camber will change on loading... In flight it will be out on the top, should be close to neutral when rolling on the ground.

    Ralph
    Ralph
    Kitfox 3 flying
    Building Kitfox SS7 (RockFox)
    915iS Engine
    Building Partner Victor V

  3. #3

    Join Date
    Mar 2018
    Location
    Lynden, WA
    Posts
    14

    Default Re: cabane gear

    Thanks for your response. Perhaps the 4 degree camber setting is suggested to compensate when there is no load on the gear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •