Fiberglass wingtips too thick

[pmpilot]

Model 7 STi.

the fiberglass wingtips finishes substantially thicker at the trailing edge. Do you just grind down the fiberglass to match the wing?

Thanks,
Pete

A1C57968-AB94-41F1-9CB4-0A28170C86D5.jpg407BCCB3-22F0-48A6-B65B-F3CC23E4C655.jpg3F335CD5-9134-4489-844B-B1ECB629311D.jpg8E98FC93-CECF-47BC-A9CB-CE1ED2566C30.jpgABD70C34-D58D-492B-8CC4-5979FE1C4679.jpg

[Delta Whisky]

I wouldn't do anything until you cover the wings. They do grow a bit thicker with fabric and paint.

[Kitfox Pilot]

Grind one or fill the other. Looks to be a big difference on you pic. What covering are you going to use?

[pmpilot]

The fiberglass is way to thick for the trailing six inches or so - not even close to the ribs on the wing. In the picture above the top skin is flush the top - view is from below...

Using Kitfox supplied Poly Fiber.

[Kitfox Pilot]

The poly fiber system does add some thickness so you will probably want to wait till you see the final thickness before grinding the wing tips. I used oratex and it is very thin since there's not painting products added and you could grind it now for that.
I had a lot of trouble with one wing tip not fitting and had to remanufacture it a bit too.
I was told the wing tips were a fiberglass warm up practice for when you get the cowls...It was a true statement.

[pmpilot]

Thanks Harlan. Heard basically the same thing from Brandon. Watched your top tank surgery video - helpful, thanks. I guess I’ll just move on last those and double back.
- Pete