Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: 2” Prop Extension

  1. #1

    Join Date
    Mar 2011
    Location
    Sherman, TX
    Posts
    2

    Default 2” Prop Extension

    Hello everyone,
    So I have an Airmaster / WarpDrive prop system ordered for my 912iS mounted on an S7, but it may be six months or so to receive it due to supply issues. In the meantime I’d like to get the cowling fitted but I have to allow for a 2” prop extension. Just wondering if I can simply manufacture a wooden extension and attach it to the flange in order to get a good fit? Sounds too easy.
    Any comments, advice, or pics would be welcome.
    Thank you,

    Len Shorethose
    DFW area

  2. #2
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: 2” Prop Extension

    If you have bought the airmaster I would email airmaster direct.
    I was to the point I needed to get my cowling fitted so I emailed them with my needs and they sent me the spacer, controller for the dash and a spinner back plate that wasn't airworthy so I was able to keep working. The rest of the prop came 4 months later. Very good company to work with IMO.
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •