Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 9 FirstFirst 123456 ... LastLast
Results 11 to 20 of 83

Thread: KingFox Model 7 STi - beginning the build

  1. #11

    Default Re: Starting on the fuselage

    Hello Eric, thanks for the confirmation on how to post. I’ll see if I can figure out the image size in pixels, if I can make a video I should be able to figure that out! I appreciate the “how to” on the Windows. I’m a Mac and do everything on the iPad. Have a good day, Matt
    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  2. #12
    Senior Member jrevens's Avatar
    Join Date
    Aug 2009
    Location
    Arvada, CO
    Posts
    2,146

    Default Re: Starting on the fuselage

    I find that I don’t have to resize them… the site does that automatically. I use a Windows PC and an iPad. Either one works… doesn’t seem to matter.
    John Evens
    Arvada, CO
    Kitfox SS7 N27JE
    EAA Lifetime
    Chap. 43 honorary Lifetime

  3. #13

    Talking Starting on the fuselage

    Moving along, please click on the video below to see further progress. Have a good day, Matt

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  4. #14

    Default Re: KingFox Model 7 STi - beginning the build

    Video # Flight controls continuation A

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  5. #15

    Default Re: KingFox Model 7 STi - beginning the build

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  6. #16

    Default Re: KingFox Model 7 STi - beginning the build

    Apologize for not posting in here in such a long time.

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  7. #17

    Default Re: KingFox Model 7 STi - beginning the build

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  8. #18

    Default Re: KingFox Model 7 STi - beginning the build

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  9. #19

    Default Re: KingFox Model 7 STi - beginning the build

    I just drilled out the tabs for the floorboard attachment points, then got to reading a post by Jez asking about attachments aside from what the manual says. I had never heard of the 3 items listed in there (Nut plates, rivnuts or tinnerman) so now I have some homework to take care of. Thanks to all for the ideas.
    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

  10. #20

    Default Re: KingFox Model 7 STi - beginning the build

    Matt Koeniguer building the KingFox
    https://www.youtube.com/@KingFox76
    KitFox Model 7STi
    Monster Shocks - 29” Alaskan Bushwheels & TW
    Engine - Wanted Rotax, now considering the Viking 150
    Propeller - MT, now probably a DUC for the Viking
    Stits Poly Fiber

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •