Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Kitfox Technical Support and Build 3 - Manual overview - Drilling and Reaming basics

  1. #1
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    531

    Default Kitfox Technical Support and Build 3 - Manual overview - Drilling and Reaming basics

    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"

  2. #2

    Thumbs up Re: Kitfox Technical Support and Build 3 - Manual overview - Drilling and Reaming ba

    John, Brandon & Heather, great video. Very clear, covered a lot of the good pointers that are listed out explicitly in the manual. I need to get in here more and look around! I really like the universal joint on your reamer also, very good ideas. Thanks for putting the video together.
    Matt Koeniguer building the KingFox
    https://youtube.com/channel/UCghEv8ArOvf3qPesuz34EcA
    KitFox Model 7STi
    Monster Shocks - 29 Alaskan Bushwheels & TW
    Engine - Want the Rotax 915is
    Propeller - Not sure yet
    Stits Poly Fiber covering when I get that far

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •