Brake lines

[Benbell4140]

Does anyone know where I can order a set of braided brake lines for gun drilled grove gear to the calipers? I tried searching and cannot find anything.


Sent from my iPhone using Tapatalk

[airlina]

just changed out mine from the nylaflow originals, got them from summit racing , can get you a part number and length tomorrow sometime. Bruce N199CL

[airlina]

did some digging and found the part number from summit racing: AER-FBPA0030-12 I have the gundrillled gear with cleveland brakes, I'll be at the hangar tomorrow and will take a pic of my routing for the 12" long lines. Bruce N199CL

[Benbell4140]

did some digging and found the part number from summit racing: AER-FBPA0030-12 I have the gundrillled gear with cleveland brakes, I'll be at the hangar tomorrow and will take a pic of my routing for the 12" long lines. Bruce N199CL

Thanks so much. I’m using grove brakes so a picture of how you routed the lines would certainly be helpful for me to determine my length.


Sent from my iPhone using Tapatalk

[rv9ralph]

This is where I bought mine. It is a division of Earl's Oil Collers.

https://www.anplumbing.com/pre-made-...tfe-hoses.html

Ralph

[airlina]

Here you go Ben, note that at the bottom of the gun drilled gear leg and also on the caliper I started with an appropriate sized elbow fitting then the 12" long SS brake line screwed on to the elbows. The adel support is just to add some stability so weeds don't pull on the brake lines. hope this helps out. Bruce N199CL

[Benbell4140]

Thanks for the help. This is exactly what I was looking for.


Sent from my iPhone using Tapatalk