Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: laser prop adjusting tool

  1. 10-20-2021, 09:10 AM #1
    avidflyer
    avidflyer is online now
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,571

    Default laser prop adjusting tool

    Years ago, I started to use a laser to adjust prop blades so they were all the same. It really works good, you can actually see the light move when you tighten the bolts. Way more accurate then a warp drive protractor I believe. Cost was about $8 for the laser pointer from ebay, and the rest was just stuff I had around the place. Here is a video of the one I made for the NR prop I got last year. JImChuk
    laser prop setting tool - YouTube
    Reply With Quote Reply With Quote
  2. 10-21-2021, 08:04 AM #2
    Eric Page
    Eric Page is offline
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    869

    Default Re: laser prop adjusting tool

    Very clever, Jim. Thanks for posting that info.
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules