Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: Banjo bolt

  1. #1
    Senior Member Flybyjim's Avatar
    Join Date
    Jul 2013
    Location
    Marysville, Pa.
    Posts
    585

    Default Banjo bolt

    I am looking for a confirmation on the torque value of the banjo bolt oil fitting on the bottom of the rotax 100uls is 105 in lbs.

    Thanks

  2. #2
    Senior Member
    Join Date
    Apr 2010
    Location
    Bryan, Texas
    Posts
    558

    Default Re: Banjo bolt

    Just got done doing this on mine and according to the 912 ULS installation manual it's 22 foot pounds or 264 inch pounds.

    Image 6-7-21 at 8.53 PM.jpg

  3. #3
    Senior Member Flybyjim's Avatar
    Join Date
    Jul 2013
    Location
    Marysville, Pa.
    Posts
    585

    Default Re: Banjo bolt

    I was looking in the heavy maintenance manual and thought I found 105 inch pounds. I will need to check this again, the difference between my find and yours is a lot. Did you find this in the Kitfox manual or did you get a book with your engine that gives you this value?
    Thanks for the information.

  4. #4
    Senior Member
    Join Date
    Apr 2010
    Location
    Bryan, Texas
    Posts
    558

    Default Re: Banjo bolt

    https://www.rotax-owner.com/pdf/IM_9...ies_Ed3_R0.pdf

    This is installation manual for the 912 ULS. When I got my engine, John with Kitfox recommend that I download it and use for reference.

    Chapter 79 covers the lubrication system.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •